PolyMide™ CoPA - 1.75 mm - 0.75 kg

Introducing PolyMide™ CoPA! A filament with the perfect balance of strength, toughness, and heat resistance. Made from a copolymer of Nylon 6 and Nylon 6,6, this filament can withstand temperatures up to 180˚C. Take your 3D printing to the next level with PolyMide™ CoPA!

All Nylon features our Warp-Free™ Technology which means it does not require a heated bed or heated chamber of more than 50˚C.
PolyMide™ CoPA can be printed on a 30-40˚C bed without enclosure.

Printing, Drying and Annealing Settings?

Printing Temperature: 250˚C - 270˚C
Bed Temperature: 25˚C - 50˚C
Printing Speed: 30mm/s - 50mm/s
Fan: OFF

Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 50mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s

Drying Settings: 80˚C for 10h
(Only if the material has absorbed moisture)

Annealing Settings: 80˚ for 6h

Do you need to anneal PolyMide™ CoPA?

PolyMide™ CoPA displays outstanding mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization after the printing process, an additional step is required: Annealing.
You can anneal PolyMide™ CoPA by placing your part in the oven at 80˚C for 6h.

Technical Datasheet [ TDS ] : Click Here